| |
|
Size |
Part
# |
|
| ANL-22 |
 |
LOW STRENGTH:
Removable for locking/sealing
small screws under 1/4" diameter.
May be disassembled with hand
tools.
Meets MIL-A-46050C Type II,
Grade M
|
10 ml
50 ml
250 ml
1 liter |
06110
06112
06111
06113 |
Click
here for MSDS |
| ANL-42 |
 |
MEDIUM
STRENGTH: Removable general
purpose adhesive, for locking/sealing
fasteners over 1/4" in
diameter. may be disassembled
with hand tools.
Meets MIL-A-46050C Type II,
Grade N |
10 ml
50 ml
250 ml
1 liter |
06120
06122
06121
06123 |
Click
here for MSDS |
| ANL-71 |
 |
HIGH
STRENGTH: Permanent , for locking/sealing
fasteners up to 1" in
diameter. Disassembly difficult
Meets MIL-A-46050C Type II,
Grade K |
10 ml
50 ml
250 ml
1 liter |
06140
06142
06141
06143 |
Click
here for MSDS |
| ANL-77 |
 |
HIGH
STRENGTH: Permanent , for locking/sealing
fasteners 1" in diameter
and larger. Disassembly difficult
Meets MIL-A-46050C Type I,
Grade L |
10 ml
50 ml
250 ml
1 liter |
06150
06152
06151
06153 |
Click
here for MSDS |
| ANL-90 |
 |
HIGH
STRENGTH: Penetrating permanent,
for locking/sealing pre assembled
fasteners. Also used to seal
weld and casting porosity.
Disassembly difficult.
Meets MIL-A-46050C Type III,
Grade R |
50 ml
250 ml
1 liter |
06162
06161
06163 |
Click
here for MSDS |
| ANL-RC |
 |
HIGH
STRENGTH: General purpose,
retaining compound for retaining
bearings, bushings, collars,
keys and splines. has .005" gap
filling capability. Allows
slip fit instead of press fit
parts |
10 ml
50 ml
250 ml
1 liter |
06170
06172
06171 |
Click
here for MSDS |
| ANL-RC/HT |
|
HIGH
TEMPERTURE: Retaining compound
for retaining bearings, bushings,
collars,gears and other cylindrical
parts Fills gaps to .015" gap
and resists temperatures up
to 450 degrees F (232 degrees
C) |
10 ml
50 ml
250 ml
1 liter |
06180
06182
06181
06183 |
Click
here for MSDS |
| Pipe
Sealant Plus Teflon® |
Temperature
Range: -65 to 300° F
(-54 o 149° C) Viscosity:
HIGH, Gap Fill: .015"
Cure Speed: 15-30 minutes primed,
2-4 hours unprimed
|
50 ml |
08000 |
Click
here for MSDS |
Hydraulic/
Pneumatic Sealant |
Temperature
Range: -65 to 300° F
(-54 o 149° C) Viscosity:
MEDIUM
Gap Fill: .015" Cure Speed:
5-15 minutes primed, 30-60
minutes unprimed |
50 ml |
08020 |
Click
here for MSDS |
| Universal
Flange Sealant |
Temperature
Range: -65 to 300° F
(-54 o 149° C) Viscosity:
HIGH,
Gap Fill: .025" Cure Speed:
15-30 minutes primed, 2-4 hours
unprimed |
50 ml |
08030 |
Click
here for MSDS |
Super Glue Corporation Home Page
